Before using the Luvele Pure Yogurt Maker remove all packaging
material. Then remove the outer yogurt maker lid and the ceramic jars
with lids. Wash them in warm, soapy water, then rinse under water and
dry thoroughly. Wipe the yogurt maker housing with a damp cloth and
dry thoroughly. Ensure that all parts are completely dry before use.
Before assembling the yogurt maker, make sure the power is
switched off at the power outlet and the power plug is removed from the
power outlet.
Prepare the yogurt mixture following the desired recipe
instructions. Refer to recipe on page 10 or visit our recipe blog at
www.luvele.com
for lots of gut loving, yogurt recipe ideas.
Insert the four yogurt jars into the base of the yogurt maker
(before adding water).
Once all four jars have been placed into the base, cold water can
now be added. Pour water into the base of the yogurt maker slowly
until it reaches the ‘tall maximum fill line indicator’ as shown on page 5.
Do not overfill.
INSTRUCTION | P9
INSTRUCTION | P8
Operating
S T E P
1
S T E P
2
S T E P
3
S T E P
4
S T E P
5
!
PLEASE NOTE:
Do not operate your Luvele Pure Yogurt Maker
without the supplied jars or without water.
S T E P
6
S T E P
7
Switch the yogurt maker on by plugging the power plug into
a power outlet. This will light up the digital display.
Press the ‘TEM’ button to select one of the three temperature settings.
Then press the ‘+’ or ‘-’ (TIME) button to select your incubation time
between 1 & 24 hours. Once you have selected the temperature and
time press the ‘CONFIRM/CANCEL’ button. The incubation period
will start. If you want to cancel the incubation time and temperature,
tap the ‘CONFIRM/CANCEL’ button twice to re-set.
What temperature should I use?
Read more on this on page 14
Avoid moving the yogurt maker during the incubation period. Do not
stir the yogurt mix during or at the end of the incubation period to
avoid the yogurt curdling.
At the end of the selected incubation time, remove the lids and
check that the yogurt has thickened and set. If the yogurt requires
more thickening, replace the lids and set the digital timer to required
additional incubation time. When the yogurt has thickened sufficiently,
switch the power off at the outlet and unplug the power cord. Remove
the yogurt jars from the base and place into the refrigerator overnight to achieve firmly
set yogurt.
PLEASE NOTE:
During the incubation period, condensation may appear on the inside of the
outer lid/cover of the yogurt maker.
This is normal due to the waterbath feature. If this occurs, be careful when
lifting the outer lid/cover off the base that water does not spill or drip.
Some separation of the liquid whey may occur. This is normal.
Pour the yogurt mixture into the yogurt jar. Place the lids onto
the jars and secure into place. When placing the lids on the
ceramic jars container, push the vacuum button shut, so it is
sitting flat. For more information on the vacuum button and lid,
please scan this QR code to watch our demo video.
