Using your Luvele
supreme
Vacuum Sealer
Making a bag with a bag roll
1. Plug the unit into a power source and then open the top cover.
2. Place a bag roll in to the bag roll storage chamber.
3. Lift up the bag cutter rack.
3. Pull the required length of the bag roll out and place it under the bag
cutter rack.
4. Place the bag cutter rack down, making sure the bag cutter knob is fully to the
left or to the right. Then slide the cutter knob from one end to the other end to
cut the bag.
3. Put one end of the bag on top of the sealing strip, but make sure the end
does not enter the vacuum chamber.
4. Close the upper lid and press tightly till you hear it click in place on both the
left and right sides.
5. Press Seal button to seal one end of the bag.
6. Press the release button to open the cover and take the bag out of the
machine. The bag is now ready for vacuum sealing.
Operating your Luvele supreme Vacuum Sealer
P/6
Summary of Contents for LSVS130G
