INSTRUCTION | P9
INSTRUCTION | P8
Operating
S T E P
1
S T E P
2
S T E P
3
S T E P
4
S T E P
5
S T E P
6
S T E P
7
FITTING AND USING THE CUTTING BLADES
Place the meat grinder body, facing you on a level, dry surface.
Fit the grinding screw inside the head.
Fit the blade over the grinding screw ensuring that the flat side of
the blade faces the cutting plate, away from the grinding screw.
Fit the cutting plate (depending on the type of mince you require).
The fixing ring then fits over the cutting plate and screws into
place.
Align the head into the grinder
body.Screw the fasten button
into place.
Before use, ensure all
elements are securely in
place.
Place a bowl underneath the fixing ring for mince collection and
the hopper plate on top of the head.
Place prepared meat into the hopper plate. Plug the power cord
into a 230-240V AC power outlet and turn control dial to the ON
position.
Using the food pusher, gently push meat through the head.
When grinding is complete, turn the dial to the off position to stop
grinder.
Operating
S T E P
10
!
PLEASE NOTE:
Do not use excessive force to push meat through the head as it
could damage the appliance.
IMPORTANT:
The flat side of the cutting blade should be facing the cutting plate.
!
CAUTION:
Do not use anything else apart from the food pusher supplied
with this meat grinder to push meat through the head. NEVER use your
hands or fingers to push meat through the head. (Fig.2)
1
2
S T E P
8
S T E P
9
S T E P
11
!
NOTE:
The head can be fixed
into the grinder body
prior to the
accessories being
attached if desired and
as shown on page 7.
