14
you want to get reminders and press . When you return to the idle screen, the
feed timer icon will show on the display. You can set your timer from every one
minute, to every 99 hours and 59 minutes. If your Parent unit is switched off , the
alert will be cancelled. It’ll start playing the alert again when you turn the unit
back on.
3.21
Cancelling the feed timer countdown
1.
Open the menu and then use the arrow buttons to get to “Feed Timer”. Press
.
2.
“Stop?” will show on the display screen. Press . “Timer Off ” will show on the
screen and the timer will disappear from the idle screen.
3.22
Switching the timer repeat option on or off
You can set your monitor to repeat feed time alerts for your chosen amount of time.
1.
Press and then use the arrow buttons to get to “Feed Timer”. Press
.
2.
Use the arrow buttons to get to “Repeat Timer”. Press
.
3.
Use the arrow buttons to choose “Repeat On” or “Repeat Off ” and press
.
Note:
When you set “Repeat On”, the feed timer countdown will start again once the alert
has sounded (if the alert isn’t switched off ). The default setting is for the timer to repeat.
3.23
Temperature monitor
Your new monitor comes with a sensor on the Baby unit, which lets you keep an eye on
the temperature of your baby’s room. If it gets too hot or too cold, the unit will tell you
by sounding an alert tone and showing the temperature on the display screen.
You can display the temperature in °C or °F.
TEMPERATURE
ON THE PARENT UNIT
Below 16°C
Display shows the temperature and
Too Cold
16 – 20°C
Display shows the temperature
21 – 24°C
Display shows the temperature and
Too Hot
Over 24°C
Display shows the temperature and
Too Hot
Important:
Use the temperature sensor only as a rough guide to the temperature of your
baby’s bedroom. What’s displayed might depend on where you put the Baby unit in the
room. It shouldn’t be used in place of medical devices, which may be more accurate.
Please note that your own temperature reference e.g. your central heating thermostat may
not be as accurate, possibly due to tolerances and positioning of the thermostat in relation
to your baby monitor. Healthcare professionals advise that the ideal temperature for your
Baby’s room is between 16°C and 20°C.
3.24
Changing the temperature format
1.
To switch between °C or °F, press on the Parent unit and then use the arrow but-
tons to scroll through to “Setup”. Press
.
2.
When you see “Temperature”, press again.
3.
Use the arrow buttons to navigate to “Temp Format” and press
.
4.
Press or to choose °C or °F and press
.
3.25
Adjusting the monitor’s temperature
If you fi nd the temperature displayed on the Parent unit is slightly diff erent on another
Summary of Contents for 75 PRO
