Lux Tools 106 542, Manual

10

Maintenance and storage

• Ensure that all nuts, bolts and screws are 

tightened and the tool is in a safe operat-
ing state.

• Check the grass collection equipment 

regularly for wear or for loss of functional-
ity.

• For safety reasons, replace worn or dam-

aged parts.

• Remember that when using a tool with 

multiple blades, moving one blade may 
lead to the other blades rotating.

• When adjusting the machine, make sure 

that no fingers are trapped between the 
moving blades and fixed parts of the 
machine.

• Allow the motor to cool down before you 

put the machine away.

• When maintaining the blades, remember 

that even if the power source is deacti-
vated, the blades can still be moved.

• For safety reasons, replace worn or dam-

aged parts. Only use original spare parts 
and accessories.

The variant of the product sold in Switzerland 
may only be used in Switzerland, as it is 
equipped with a Swiss plug.
You can identify the variant by means of the 
item number on the product (the instructions 
always contain all item numbers):

• Item number Switzerland: 468 449, 

468 604

• Item number in other EU countries: 

106 542, 106 543, 106 544, 106 545

The device at a glance

► P. 3, item 1

1. Upper retaining bracket
2. Switch-on lever
3. Quick release lever
4. Lever (for cutting height adjustment)
5. Wheel left
6. Motor
7. Wheel (front)
8. Wheel (rear)
9. Cable grip
10. Cable clamp
11. Grass collector

12. Safety flap
13. Lower retaining bracket
14. Mains plug
15. Safety lock

Scope of supply

• Instructions for use
• Lawn mower
• Upper retaining bracket
• Lower retaining bracket
• Grass collector
• Bag with mounting material

Assembly

Mounting the lower retaining bracket

► P. 4, item 2

– Mount the lower retaining bracket (13) as 

illustrated.

– Repeat the procedure for the other side.

Mounting the upper retaining bracket

► P. 4, item 3

– Mount the upper retaining bracket (1) as 

illustrated.

– Repeat the procedure for the other side.
– Adjust the angle and fix using the quick 

release lever (3).

– Attach the cable using cable clamp(10) 

onto the lower retaining bracket(13).

Attaching the collecting sack

► P. 4, item 4

– Clip the rubber lip (16) of two sides of the 

cloth grass collecting bag onto the wire 
bar (17).

– Fully insert the rods of the wire bar into 

the slots (18) on either side of the plastic 
base of the grass collecting bag.

– There is a hole (19) in the bottom of the 

grass collector to hang it up if required. 
The grass collecting bag is also designed 
to collapse into a compact size to reduce 
storage when the lawnmower is not in 
use.

DANGER! Risk of death through 
electric shock! 

The use of this vari-

ant outside Switzerland is not per-
missible for safety reasons, as this 
poses a risk of electric shock or fire.

WARNING! Risk of injury! 

Place the 

product horizontally on a stable, suf-
ficiently load-bearing and level sur-
face.

Note: 

It must be possible to close 

the quick release levers completely. 
If necessary, slightly loosen the self-
locking nuts.

GB