Lux Tools 115 324, Original Instructions Manual

11

►

P. 5, item 5

– Pull the lever (5) to the side.
– Set the cutting height to the value you

require, and let the lever slot back into
place.

Attaching the cuttings bag

►

P. 5, item 6

– Lift the protective flap (6) and hold.
– Slot the cuttings bag (7) into place.
– Ensure that the bag has slotted into place 

securely.

Mounting the mulch wedge

►

P. 5, item 7

– Remove the collecting sack.
– Push the mulch wedge (18) into the open-

ing of the machine until it engages.

– Lower the safety flap (6).

Connecting the product

►

P. 6, item 8

– Insert the extension cable coupling into

the mains.

– Feed the extension cable through the

strain relief mechanism (8) as shown.

Turning on the tool

►

P. 3, item 1

– Press and hold down the switch lock (9).
– Pull the switch on lever (1) and hold.
– Release the switch lock.

The unit will switch itself on with approxi-
mately 2 seconds delay.
Switching-off the device

– Release the switch on lever.

Mowing

– Guide the unit at an even, slow pace

(walking speed) and with as straight a
path as possible.

Important notes

• Always work at right angles to the slope.
• Try not to cut grass when wet.
• Use overlapping paths to produce an

even cutting pattern.

• Cut longer grass with a greater cutting

height initially, then cut crosswise using
the desired cutting height.

►

P. 5, item 6

• If the air flap (17) closes, the collection

container is full and must be emptied.

Information on mulching

►

Mounting the mulch wedge – p. 11

• Do not mulch moist grass.
• Regularly clean the mulch wedge, ejec-

tion channel and cutting blade.

Cleaning and maintenance

Cleaning and maintenance overview

Before each use

Cleaning the device

Clean unit immediately after every use. Dried 
grass remains are very hard, and are very dif-
ficult to remove.

– Remove grass remains with a brush, and

a plastic scraper if required (do not use
sharp implements).

– Remove deposits on the wheels.
– Wipe the tool with a damp cloth.
– Never clean the unit with water or high-

pressure jet.

WARNING! Risk of injury! 

Before 

starting work, check the area and 
remove all objects which may be 
kicked up by the unit.

Note: 

Mulching is the use of cut 

grass as a natural compost. When 
mulch-mowing, the grass is cut, 
finely chopped and spread across 
the grass in one operation.

DANGER! Risk of injury! 

Carry out 

the maintenance work described 
here in person.
Improper maintenance work can 
damage the device and lead to inju-
ries.

DANGER! Risk of injury! 

Before 

carrying out any maintenance or 
cleaning work, the machine must be 
disconnected from the power and 
secured to prevent accidental switch 
on.

What?

How?

General function check.

Visual check.

Check all screw connec-
tions and tighten if neces-
sary.

GB

temp.book  Seite 11  Donnerstag, 5. November 2015  10:07 10