Lux Tools 115 324, Original Instructions Manual

8

• Always comply with all applicable

domestic and international safety, health, 
and working regulations.

Electrical safety

• The device may only be connected to a

socket that is correctly installed and
grounded.

• The fuse must be a residual current cir-

cuit-breaker with a measured residual
current of no more than 30 mA.

• Make sure that the power supply corre-

sponds with the connection specifica-
tions of the device before it is connected.

• The tool may only be used within the

specified limitations for voltage and
power (see type plate).

• Do not touch the mains plug with wet

hands! Always pull out the mains plug at
the plug and not by the cable.

• Do not bend, crush, pull or drive over the

power cable, protect from sharp edges,
oil and heat.

• Do not lift the device using the cable or

use the cable for purposes other than
intended.

• Check the plug and cable before each

use.

• If the power cable is damaged immedi-

ately disconnect the plug. Never use the
device if the power cable is damaged.

• If the device is not in use make sure the

plug is pulled out.

• Make sure that the device is switched off

before plugging in the mains cable.

• Make sure that the device is switched off

before unplugging it.

• Disconnect the power supply before

transporting the device.

Maintenance

• Before conducting any maintenance on

the device, disconnect the mains plug.

• Only those maintenance and fault elimi-

nation tasks described here may be car-
ried out. Any other tasks must be com-
pleted by a specialist.

• Only use original replacement parts. Only 

these replacement parts are designed
and suitable for the device. Other
replacement parts will not only lead to an
invalidation of the warranty, they may
also endanger you and your environment.

Device-specific safety instructions

• Pay attention when walking backwards.

Danger of stumbling!

• Pay attention to local regulations for rest

periods.

• Remember that moving parts may also

be located behind ventilation and venting 
slots.

• Symbols affixed to your tools may not be

removed or covered. Information on the
device that is no longer legible must be
replaced immediately.

Personal protective clothing

Training

• Read the operating instructions carefully.

Make sure that you are familiar with the
adjustment elements and the correct use
of the machine.

• Never allow children or other people who

are not familiar with the operating instruc-
tions to operate the lawn mower.
Regional legislation may specify the min-
imum permitted age of the user.

Observe the safety instructions be-
fore using the product for the first 
time.

Risk of injury due to electrical pow-
er!

Read and observe the operating in-
structions before commissioning.

Risk of injury due to flying objects!

Always ensure sufficient safety dis-
tance is held.

Keep cables well away from the 
unit.

Risk of injury due to cutting mecha-
nism!
Never reach into the cutting mech-
anism.

Before doing any maintenance and 
repair work disconnect the machine 
from the power.

Wear ear defenders when working 
with the device.

When working with the tool wear 
sturdy footwear.

Wear goggles when working with 
the device.

Wear safety gloves when working 
with the device.

GB

temp.book  Seite 8  Donnerstag, 5. November 2015  10:07 10