Lux Tools 380 335, Original Instructions Manual

13

tion with wood treatment additives (chro-
mate, wood preservatives). Materials con-
taining asbestos may only be processed by 
experts.

– Always use a dust extraction facility.
– Make sure the workplace is well venti-

lated.

– Always wear a dust protection mask.
– Observe the regulations valid in your 

country for the materials to be processed.

Risks caused by vibrations

The vibration values specified in the technical 
data represent the main uses of the device. 
The actual existing vibrations during use may 
deviate from these as a result of the following 
factors:

• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.

You can reduce the risks considerably by fol-
lowing the tips below:

– Maintain the device in accordance with 

the instructions in the operating instruc-
tions.

– Avoid working at low temperatures.
– When it is cold, make sure your body and 

your hands, in particular, are kept warm.

– Take regular breaks and move your 

hands at the same time to promote circu-
lation.

Handling of laser beams

• Do not look directly into the laser beam 

without wearing eye protection.

• Do not point the laser beam at reflective 

surfaces, people or animals. Even a laser 
beam with low output can cause damage 
to the eyes.

• Use the product only for the processes 

described here, otherwise dangerous 
radiation exposure can occur.

• Do not open the laser module.

• Never replace the laser with other laser 

types.

• Repairs may only be carried out by the 

laser manufacturer or by authorised 
experts.

Caution! Laser beam.
Do not look directly into the beam, not even 
from great distances.
Laser Class 2
EN 60825-1: 2007
λ 650 nm, Pmax ≤ 1 mW

Residual risks

Even with proper use of the product and 
when heeding all safety instructions in these 
instructions for use, the following residual 
risks can arise:

• Touching the saw blade in the area which 

is not covered.

• Reaching into the running saw blade.
• Rebound from workpieces and work-

piece parts.

• Broken saw blades.
• Ejection of damaged hard metal parts 

from the saw blade.

• Hearing damage through not using the 

necessary hearing protection.

• Harmful emissions from wood dust when 

using the product in enclosed rooms.

Personal protective equipment

Your product at a glance

►

 P. 3, item 1

1. Safety lock

CAUTION! Risk of injury due to 
vibrations! 

Vibrations may, in partic-

ular for persons with circulation 
problems, cause damage to blood 
vessels and/or nerves.
If you notice any of the following 
symptoms, stop working immedi-
ately and consult a doctor. Numb-
ness of body parts, loss of sense of 
feeling, itching, pins and needles, 
pain, changes in skin colour.

Wear goggles and ear defenders 
when using the device.

Wear a dust mask when working in a 
dusty environment.

Wear tight-fitting clothing when work-
ing with the product.

Cover long hair or wear a hair net if 
necessary.

Do not 

wear protective gloves when 

working with the product.

Wear gloves when touching the saw 
blades and rough materials.

LASER LIGHT
Warning: Do not stare into beam
Wavelength: 650nm
Output max.: <1mW
C L A S S   2   L A S E R   P R O D U C T
EN 60825-1: 2007

GB

temp.book  Seite 13  Donnerstag, 7. April 2016  9:58 09