26
If you can’t fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
Appliances which are labelled with the adja-
cent symbol must not be disposed of in
household waste. You must dispose of such
old electrical and electronic equipment sep-
arately.
– Please check with your local authority about the
possibilities for correct disposal.
Through separate disposal you send old equipment
for recycling or for other forms of re-use. You will
thus help to avoid in some cases that damaging
material gets into the environment.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.
Technical data
*)
The specified values are emission values and do not necessar-
ily represent safe workplace values. Although there is a corre-
lation between emission and immission levels, this cannot be
used to infer whether additional safety measures are necessary
or not. Factors which affect the current immission levels at the
workplace, include the type of room, other sources of noise,
e. g. the number of machines operating and other processes
taking place in the vicinity. Permitted workplace values can dif-
fer from country to country. This information is designed to help
the user to better assess the dangers and risks. Determination
of noise emission values in accordance with EN 60745-1.
**) The specified vibration emission value was measured in
accordance with a normed test procedure and can be used in
order to compare one tool with another. The specified vibration
emission value can also be used for an introductory evaluation
of the exposure. The vibration emission value may fluctuate
from the specified value during actual use of the power tool.
These fluctuations will depend on the way in which the power
tool is used. Try to keep vibrations to a minimum. One method
of reducing the vibration load is, for example, limiting the length
of time you work with the tool. All parts of the operating cycle
must be taken into account for this purpose (for example, also
including times in which the power tool is switched off and
times in which it is switched on, but is running without load).
Determination of vibration emission values in accordance with
EN 60745-1.
No hammer drilling functionality. Switch for drilling/hammer drilling
is not selected correctly?
Set the switch to the
[
]
position.
Error/Fault
Cause
Remedy
Part number
380 379
Rated voltage
230 V~, 50 Hz
Nominal capacity
750 W
Protection class
II
Nominal revolutions
0–3000 min
−1
Hammer rate
0–48000 min
−1
Max. drill chuck diameter
• Concrete
• Steel
• Wood
13 mm
10 mm
30 mm
Sound power level (L
WA
)*
103 dB(A)
(K = 3 dB(A))
Sound pressure level (L
PA
)*
92 dB(A)
(K = 3 dB(A))
Vibration**
• Hammer drilling
• Drilling
< 6,63m/s²
(K = 1,5 m/s²)
< 2,62 m/s²
(K = 1,5 m/s²)
GB
Schlagbohrmaschine_380379.book Seite 26 Montag, 23. Januar 2017 12:19 12
Summary of Contents for 380379
Page 3: ...3 1 2 6 7 3 5 4 1 1 2 Schlagbohrmaschine_380379 book Seite 3 Montag 23 Januar 2017 12 19 12 ...
Page 81: ...81 Schlagbohrmaschine_380379 book Seite 81 Montag 23 Januar 2017 12 19 12 ...
Page 82: ...82 Schlagbohrmaschine_380379 book Seite 82 Montag 23 Januar 2017 12 19 12 ...
Page 83: ...83 Schlagbohrmaschine_380379 book Seite 83 Montag 23 Januar 2017 12 19 12 ...
