LUX 468428, Original Instructions Manual

10

• If the mower starts to vibrate in an unu-

sual way, immediately check it.
– Look for damages;
– Carry out all necessary repairs to dam-

aged parts;

– Make sure that all nuts, bolts and 

screws are tightened firmly.

Maintenance and storage

• Ensure that all nuts, bolts and screws are 

tightened and the tool is in a safe operat-
ing state.

• Check the grass collection equipment 

regularly for wear or for loss of functional-
ity.

• For safety reasons, replace worn or dam-

aged parts.

• Remember that when using a tool with 

multiple blades, moving one blade may 
lead to the other blades rotating.

• When adjusting the machine, make sure 

that no fingers are trapped between the 
moving blades and fixed parts of the 
machine.

• Allow the motor to cool down before you 

put the machine away.

• When maintaining the blades, remember 

that even if the power source is deacti-
vated, the blades can still be moved.

• For safety reasons, replace worn or dam-

aged parts. Only use original spare parts 
and accessories.

The device at a glance

► P. 3, item 1

1. Upper retaining bracket
2. Switch-on lever
3. Quick release lever
4. Lever (for cutting height adjustment)
5. Wheel left
6. Motor
7. Wheel (front)
8. Wheel (rear)
9. Cable grip
10. Cable clamp
11. Grass collector
12. Safety flap
13. Lower retaining bracket
14. Mains plug
15. Safety lock

Scope of supply

• Instructions for use
• Lawn mower

• Upper retaining bracket
• Lower retaining bracket
• Grass collector
• Bag with mounting material

Assembly

Mounting the lower retaining bracket

► P. 4, item 2

– Mount the lower retaining bracket (13) as 

illustrated.

– Repeat the procedure for the other side.

Mounting the upper retaining bracket

► P. 4, item 3

– Mount the upper retaining bracket (1) as 

illustrated.

– Repeat the procedure for the other side.
– Adjust the angle and fix using the quick 

release lever (3).

– Attach the cable using cable clamp(10) 

onto the lower retaining bracket(13).

Attaching the collecting sack

► P. 4, item 4

– Mount the grass collector (11) as illus-

trated.

– Press the handle (A) into the upper cover 

(C) until it audibly snaps in.

– Insert the mounting bracket (D) and fix it 

with washers and screws (E).

– Hook the lower cover (F) into the mount-

ing bracket (D) (carrying lugs are outside).

– Press the fixing bar (G) into the outer 

edge of the lower cover (F) until it audibly 
snaps in.

Hook on the grass collector

► P. 5, item 5

– Mount the grass collector (11) as illus-

trated.

Note: 

If a part is missing or dam-

aged, please contact the vendor.

WARNING! Risk of injury! 

Place the 

product horizontally on a stable, suf-
ficiently load-bearing and level sur-
face.

Note: 

It must be possible to close 

the quick release levers completely. 
If necessary, slightly loosen the self-
locking nuts.

GB