76
Storage
1. Always close the gas valve of the
gas cylinder after use or in case of
disturbance.
2. Remove the pressure controller and the
hose.
3. Check the tightness of the gas valve and
for damage. If you suspect a damage,
have it changed by your gas dealer.
4. Never store liquid gas cylinders in a sub-
terrain, or at places without adequate air
ventilation.
Cleaning and care
• Wipe off powder coated surfaces with
soft, moist rag. Do not clean heater
with cleaners that are combustible or
corrosive.
• Remove debris from the burner to keep it
clean and safe for use.
• Cover the burner unit with the optional
protective cover when the heater is not
in use.
Assembly
Please refer to the component overview at
the back of these user instructions.
Fit the clamps to the base using 3 screws (C).
Fit the reinforcement brackets (F) to the base
using 2 screws, 2 washers and 2 nuts (G)
each.
Summary of Contents for 547705
Page 139: ...139 A B C D E F G H I...
