LUX KW30LCD, Installation And User Manual

LUXCANADA.CA

14

TM

6-SPEED ELECTRONIC TOUCH CONTROL

BUTTONS FUNCTIONS

Light settings are independent from other settings (including power-off delay) and lights must be manually turned on or off. 

The system saves user configurations and settings, such as light, timer and blower speed. These will remain the same the next time

 the unit is turned on.

•  POWER : 

Turns the range hood on and off, and activates the power-off delay timer.

•  DECREASE  VALUE : 

Decreases blower speed, enters timer mode and decreases timer value. 

•  INCREASE  VALUE : 

Increases blower speed and timer value, and resets cleaning reminder. 

•  BLOWER SPEED INDICATOR : 

Displays current blower speed (from 1 to 6)

•  LIGHT : 

Turns halogen or LED lights on and off. 

•  POWER-OFF DELAY DIGITAL TIMER : 

Indcate lenght of time left on the delay-off timer. 

CONTROLS

AUTOMATIC CLEANING REMINDER

This range hood is equipped with a cleaning reminder that will activate following 30 hours of use. When 
the cumulative running time reaches 30 hours, a beep will sound when the blower (motor) starts to rotate as 
a reminder to clean the aluminum filter. After cleaning the filter and when the motor is not in use, press and 

hold 

Increase Value

 for three seconds to reset the timer. Note that turning off the system will not reset the 

Power-On Elapsed Timer

.

ADJUSTING THE DURATION OF POWER-OFF TIMER

While the blower is not running, press 

Decrease Value

 button and hold for 3 seconds to enter timer mode. 

Adjust to desired duration of timer (1-15 minutes) by pressing 

Increase Value

 or 

Decrease Value

 buttons. 

This setting is saved immediately.

ACTIVATING THE POWER-OFF TIMER

While the blower is running, press 

Power button

 and hold for over 3 seconds to activate

 Power-Off Timer

. 

Countdown begins and when it reaches zero, the blower (motor) will shut down.

ADJUSTING THE BLOWER (MOTOR) SPEED

Press 

Power

 once to turn the system on. The 

Blower Speed Indicator

 shows the blower speed level. Press 

Decrease Value 

to decrease the speed of the blower from 6 (strongest and loudest) to 1 (weakest and 

quietest). Press 

Increase Value

 to increase the blower speed as desired.

Press

 Power

 once to turn the unit off.