LUXCANADA.CA
13
TM
4.
Using a jigsaw, cut along the lines drawn in step 2, until the cabinet underside falls out.
5. Remove the filters from the range hood ans position the hood inside the opening.
6. Screw the range hood onto the edge of the opening using the pre-drilled holes.
7.
Calculate the lenght of the duct needed and add 6” more. Connect one end of the duct to the range and the
other end to the exhaust vent. Make sure the main power supply is disconnected before plugging in the range
hood.
8. Reinforce and properly seal the flexible duct and both ends using aluminum tape.
9.
Install the grease collector and the filters, and verify that the range hood functions properly.
SEVERE INJURY
Hood may have very sharp edges. Please wear protective
gloves if it is necessary to remove any parts for installation,
cleaning or service.
Summary of Contents for VB30LCD
