background image

INSTALLATION

9

Hold the cord tensioner firmly in place and check that the cord can 

move freely through it. If the cord does not move freely through the 

cord tensioner, it is too tight and the cord tensioner and/or bracket 

should be moved up. If the cord tensioner locks onto the cord, it is too 

loose and the cord tensioner and/or bracket should be moved down.  

Mark and pre-drill the screw hole. 

Mount the cord tensioner with a Phillips screwdriver and one of 

the longer screws provided to attach the cord tensioner directly to 

the wall.

Finally, ensure the cord can move freely through the cord tensioner 

without engaging the lock. The centre of the screw hole should 

be aligned with the indicator line on the cord tensioner. Do 

not pull the screw hole down to the bottom of the slot. This 

may cause the cord to become too tight, affecting the window 

covering function and increasing cord wear. 

Reveal Mount with a Bracket 

This option uses three screws with the Reveal Mount bracket 

and slightly projects the cord loop from the window covering 

allowing for easier access. Locate the cord tensioner as close 

to the window glass as possible to minimise accessibility by 

children and pets. Be sure the cord tensioner is not placed in 

the path of the bottom rail and fabric.

Break off the Reveal Mount bracket and mark screw locations. 

Reveal

Face

18.019.008-DUETTE-EASYRISE-INSTALL.indd   9

4/06/2019   10:51:51 AM

Summary of Contents for EasyRise Duette

























Reviews: