LuxaFlex EasyRise Duette, Installation Operation Care

INSTALLATION

10

■

■

Attach the Reveal Mount bracket to the cord tensioner. The nub on the Reveal 

Mount bracket fits into the back of the screw hole in the cord tensioner. 

■

■

Insert the small screw into the front of the screw hole to secure the 

cord tensioner to the bracket.

■

■

Pull down on the bracket, aligning the centre of the screw hole with the 

indicator line on the cord tensioner. Hold the cord tensioner firmly in place and 

check that the cord can move freely through it.  

■

■

If the cord does not move freely through the cord tensioner, it is too tight and the 

cord tensioner and/or bracket should be moved up.

■

■

If the cord tensioner locks onto the cord, it is too loose and the cord 

tensioner and/or bracket should be moved down. Mark and pre-drill the 

screw holes. 

■

■

To mount the cord tensioner, pull down on the Reveal Mount 

bracket and align it with the drilled holes. Insert one of the two 

longer screws and loosely attach the bracket to the wall. Pivot the 

bracket to align it with the second screw and attach the second 

screw. Tighten both screws. 

■

■

Ensure the cord can move freely through the cord tensioner without engaging the lock. The 

centre of the screw hole should be aligned with the indicator line on the cord tensioner. Do 

not pull the screw hole down to the bottom of the slot. This may cause the cord to become 

too tight, affecting the window covering function and increasing cord wear.

18.019.008-DUETTE-EASYRISE-INSTALL.indd   10

4/06/2019   10:51:52 AM