LuxaFlex EasyRise Duette, Installation Operation Care

INSTALLATION

7

Install the Shade

■

■

Fit the front channel on top of the headrail onto the front lip of 
installation brackets.

■

■

Push the headrail up and back until it snaps into place.

■

■

Check to ensure the headrail is securely in the brackets.

■

➤

Check that the bottom of the headrail is snapped into the base 
of each bracket.

■

➤

Check that the front lip of each bracket is in the front channel of 
the headrail.

■

■

If any brackets are not installed correctly, release the shade and 
reinstall. See “Removing the Shade, If Necessary” on page 16.

Attach the Universal Cord Tensioner(s)

Before you proceed, you must first slide the cord tensioner(s) to 

the bottom of the cord loop.

■

■

Insert a small screwdriver, punch or awl through the screw 

hole at the bottom of the cord tensioner.

■

■

Move the screw hole down to the indicator line to release 

the safety mechanism.

■

■

Slide the cord tensioner down to the bottom of the cord loop.

WARNING:  It is imperative that the cord tensioner(s) be properly secured to the 

wall or window frame to reduce children’s access to the cord loop. Young 

children can strangle in cord loops. They can also wrap cords around their 

necks and strangle.

Good

Bad

Back of Headrail

Snaps into Bracket

Front of Bracket 

Fits Under Groove

Headrail

Bracket

Snap in

Place

1

2

Screw

Hole

Indicator

Line

18.019.008-DUETTE-EASYRISE-INSTALL.indd   7

4/06/2019   10:51:51 AM