Phone: +1 (949) 654-2047
Address: Irvine, CA, USA
Document name: AMP-1002 quick start guide
Revision: 1.05
Date: 7/31/2020
US and PCT patents pending
Specifications are subject to change without notice
Product Specifications
Part Number: 76-005-01
100 W (50 W x2) power amp
Model: AMP-1002
Product Image
Product Drawing
Features and Benefits
Mechanical
> World's smallest 100 W (total) power amp; only 1 inch
Enclosure material: steel
(2.5 cm) high, can fit in many tight spaces others can't
Enclosure size: 4.29” x 1.00” x 3.00” (10.9 x 2.5 x 7.6 cm)
> One of the most efficient (up to 92%) class D power amps,
Electrical (all numbers are typical)
no fans, no special ventilations needed; most reliable
Gain (from input to speaker out at rated power)
> Full array of 4 inputs including 1 bal/unbal input, 1 wireless
Bal: 20 dB; Line: 32 dB; Mic: 42 dB
mic receiver input, 2 line inputs
Stereo channel crosstalk: 77 dB at 1 kHz
> All 4 inputs mixed to eliminate switching needs and pops
CMRR (Bal input only): 66 dB at 1 kHz
> Separate line gain and mic gain (independent from volume)
Input connectors: Bal/unbal: 5-pin 3.5 mm captive screws
> Remote 10k pot volume control for the instant changes and
Line: two stereo TRS 3.5 mm mini jacks
ultra fine volume adjustments with infinity number of steps
Mic: mono TS 3.5 mm mini jack
> Mute control for emergency PA duck
Input impedance: Bal/unbal: 30k ohms; Line: 3.2k ohms
> EnergyStar qualified
Mic: 3.2k ohms
> Ultra low 0.04% THD+N, ultra high 90 dB S/N at rated power Nominal input levels: Bal/unbal: +4 dBu (1.23 V) balanced
> Clip limiter
Line: -10 dBV (316 mV) unbal; Mic: -20 dBV (100 mV) unbal
> Full over or under voltage, overheat, DC, short protections
Max input levels: Bal/unbal: +26 dBu (15.6 V) balanced
> Multiple internal switching frequencies to prevent AM noises
Line: +12 dBV (3.9 V); Mic: +1 dBV (1 V)
> UL rated (on external power adaptor)
Input sensitivity: Bal/unbal: -8 dBu (0.31 V) balanced
> Status indication LED
Line: -22 dBV (79 mV); Mic: -32 dBV (25 mV)
> Rack mountable, under-table mountable, above-projector,
Speaker impedance: 4 to 16 ohms
behind flat TV mountable metal enclosures
Typical output power: 54 Wrms x2, 4 ohm load, 1 kHz, 1% THD
Package
32 Wrms x2, 8 ohm load, 1 kHz, 1% THD (*see manual)
One piece in one color cardboard box; with captive screw
Frequency response: 20 to 20k Hz +0/-0.7 dB at 8 ohm
plugs and quick start guide
THD+N: 0.037% at 1 W, 8 ohm
no power adaptor
S/N: 90 dB, Line input, unweighted, at 1% THD
Damping factor: >100 at 8 ohm
Box size: 5.9” x 4.8” x 1.1” (15.0 x 12.2 x 2.8 cm)
Weight: package, 0.73 lb (0.33kg); product, 0.55 lb (0.25kg)
36-pc box size: 15" x 12.6" x 8" (38 x 32 x 20.5 cm)
36-pc box weight: 28 lb (12.7 kg)
Connections
Input connectors: 4 inputs on captive screws and mini jacks
Output connector: 4-pin 5 mm captive screw receptacle
Controls: Front panel Line Gain and Mic Gain recessed pots
Power connector: 2-pin 5 mm captive screw receptacle
Line signals are controlled by main volume; Mic is not.
Control connectors: 3-pin 3.5 mm captive screw receptacle
Rear panel volume control: 0-10 V DC, external 10k pot
Other Related Products
Emergency PA mute by shorting the center pin to ground
Power adaptor, 100-240 V in on US plug,
Power consumption: 24 V DC, up to 4 A
24 V out, P/N 69-008-03
Optional power supply: Not included. Luxi 69-008-03
Auto switching 100-240 V AC input on US plug, 24 V DC
Under desk mount, P/N 78-002-01
2.7 A max on bare wires, wall ward type, UL, PSE, CE, FCC
Mounting: Not included. Luxi under desk mount 78-002-01
compatible with several Extron and Middle Atlantic mounts
Regulatory compliance
Safety: CE, cUL, UL (power adaptor only)
90 W 70/100 V power amp
EMI/EMC: CE, FCC Class A
P/N 76-006-01
MTBF: 30,000 hours
Warranty: 3 years parts and labor
