4
KTS13-SG Rev. 1 5/2020
Luxier USA
Installation
B
A. Shut off water supply at the valves.
Remove the old faucet and clean the
mounting surface for installation of the
new faucet.
D. Use Wrench to tighten the water
supply hoses, please do not overtighten
the connections.
B. Attach flange to the faucet and insert
the faucet through the mounting hole on
the counter top.
Flexible water supply line
D
HOT
COLD
A
13
14
15
16
C
C. Under the sink, slide the plastic guide
(13), rubber washer (14) and metal
washer (15) onto the faucet. Tighten the
mounting kit with the locking nut (16)
to secure the faucet to the countertop.
(
IMPORTANT:
Use the plastic guide
(13) for countertop that’s less than 1.3”
thick. The guide will provide additional
support for the faucet. For countertop
thickness between 1.3” - 2” do not use
the plastic guide.)
E. Remove spray head from the pull
out hose and turn on the faucet to
flush the system. Let the water run for
about 1 minute and check for leaks. Re-
attach the spray head to complete the
installation.
E
01. Hex Wrench
02. Cap
03. Setscrew
04. Handle
05. Cap
06. Bonnet
07. Cartridge
08. Body
09. Spring
10. Sprayer Head
11. Flange
12. Water Supply Hoses
13. Plastic Guide
14. Rubber Washer
15. Metal Washer
16. Locking Nut
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
