ZMX
Wireless Transmitter Setup Instructions
www.luxiumlighting.com
11/2017
ZMX
®
Technical Characteristics
Frequency Range
2.4 GHz ~ 2.483 GHz (ISM band)
Number of Channels
16, user selectable
Transmitter Range
500 meters / 1500 feet (open air)
DC power in
5V at 200mA
Dimensions (W x H x D), Weight
88 x 100 x 40mm, 150g ( 0.3 pounds)
DMX in and thru
XLR 5-pin connectors
Built in Sequences
6-Color, 2-Color, Fixed Color
USER INTERFACE:
Status Indicator
Lights with ZMX receivers have a green status LED in the system. This indicates the pairing,
radio signal, and DMX data status:
●
Solid On - Light has not been paired
●
Fast Blink (½ second) - The light has been paired, but it not receiving a signal from the
paired transmitter.
●
Slow Blink - The light is paired and receiving a signal but not getting DMX data.
●
Off - The light is paired and receiving DMX data from the paired transmitter.
Main Menu
Turn the selector knob to the desired function and press it to select it. The main menu has 8
functions.
Pair
Selecting pair causes the ZMX transmitter to send out an invite signal. Any unpaired lights that
receive the invite signal will pair themselves to the transmitter sending the signal on the
transmitter’s channel and will not respond to other
transmitters. The pairing process can take
up to 10 seconds.
Un-Pair
Selecting unpair puts any lights paired to the transmitter back into the unpaired state, allowing
it to be paired to a new transmitter. Unpair will work even if the light is on a different channel
Unpair All
Unpair All works the same as Unpair, however this will unpair all lights even when they are
paired to other transmitters. Lights must be powered on for successful pairing and unpairing.
