ZMX
Wireless Transmitter Setup Instructions
www.luxiumlighting.com
11/2017
2-Color Fade
Each light in a group fades between two colors shown in the following table:
Group
1
2
3
4
5
6
1st Color
1 (red)
2 (yellow)
3 (green)
4 (cyan)
5 (blue)
6 (magenta)
2nd Color
2 (yellow)
1 (red)
4 (cyan)
3 (green)
6 (magenta)
5 (blue)
Fade Strobe
Each light fades through the six colors, then does a rapid color change creating a strobe effect.
Chase
Lights one light in a series of 6 lights at a time, creating the effect of a light traveling down a
row of lights.
OPTIONS:
The options item in the Light Show menu allows more advanced control of the different shows.
Dwell
Dwell commands in a show cause the state of the lights to stay for the dwell time. The default
dwell time is ½ second.
Fade
Each show is composed of series of fade commands. A fade command causes a group of lights
to transition from its current color to a new color over a certain amount of time. The default
fade time is 1.5 seconds. To change the default fade time, Click Fade in the options menu, turn
the selector knob to the desired time, and Click again.
