Luxman D-03X, Owner'S Manual

18

COMPACT DISC PLAYER D-03X

Before connecting

Before connecting other devices, connect the jack side of the 

accessory power cable to the AC inlet of this unit.

When connecting, turn off the power supply of this unit and  

the power supplies of auxiliary devices to prevent unexpect-

ed accidents that may be caused by noise.

Connecting to the power supply

Insert the accessory power supply cable plug into an AC out-

let on the wall of the listening room.

How to connect input devices

1.   Digital connection from a PC/Mac (Refer to 

the connection diagram (A).)

Connect between the USB (A-type) terminal of the PC or 

Mac and the USB (B-type) terminal of this unit with a USB 

cable.

When using Windows OS, the dedicated driver software 

needs to be downloaded from the LUXMAN website and 

installed.

Refer to the “Driver Installation Manual” on the LUXMAN 

website for detailed information.

When using Mac OS, this unit is automatically recognized.

Caution:

Connection between a PC and this unit using a USB cable 

should not be performed before the installation of the dedicat-

ed driver software is completed. Failure to observe this may 

cause malfunction.

2.   Digital connection from a device such as a 

CD player (Refer to the connection diagrams 
(B) and (C).)

Connect between the (coaxial or optical) digital output ter-

minal of a CD player, an SACD player, a DVD player or other 

such devices and the digital input terminal (COAX/OPT) of 

this unit with a coaxial digital cable and an optical digital 

cable.

This terminal is a shutter-type optical terminal. Direct the 

cable connector correctly when inserting the cable into the 

terminal. If the cable connector is inserted forcibly in the 

wrong direction, the terminal may be deformed and the 

shutter may not be able to close even after disconnecting 

the cable.

The optical terminal is mounted as illustrated.

How to connect output devices

1.  

Unbalanced connection with a device such 
as an integrated amplifier (Refer to connec-
tion diagram (D).)

Connect between the unbalanced analog RCA output ter-

minals of this unit and the unbalanced input terminals of a 

sound-volume-adjustable device such as an integrated am-

plifier using two RCA cables (L/R).

2.   Balanced connection with a device such as a 

pre-amplifier (Refer to connection diagram (E).)

Connect between the balanced analog output terminals 

(BAL LINE) of this unit and the balanced input terminals of 

a device such as an integrated amplifier with two balanced 

XLR cables (L/R).

3.   Digital output to a device such as another D/A 

converter (Refer to connection diagram (F).)

Connect between the digital output terminal (COAX/OPT) 

of this unit and a device such as a D/A converter or a unit 

equipped with digital input terminals with a coaxial digital 

cable or an optical digital cable.

Lower side

Upper side