Luxman D-10X, Owner'S Manual

3

Features of This Unit

LxDTM improved — LuXman original Disc 
Transport Mechanism —

The side frame, spanning front to rear, forms a highly rigid 
chassis made from 8 mm thick aluminium and is solidly con-
nected to the disc transport mechanism.
Moreover, we have introduced an SSB (Stabilized Support 
Block) and a 5mm steel top plate to ensure unshakable ri-
gidity.
The aluminum die-cast disc tray also helps to control vibra-
tion and resonance.
The disc tray opens and closes via a QLL (Quiet Linear Load-
er), ensuring quiet, smooth operation.

Shutter mechanism

The dust-proof shuter (DPS) prevents dust entering the unit 
and provides internal sound insulation.

Analog circuitry

The fully balanced outputs are fed from D/A converter via a 4 
channel discrete amplifier system, featuring LUXMAN’s latest 
ODNF-u (Only Distortion Negative Feedback-ultimate) circuit-
ry, with 6 dB of raw gain.
The amplification feedback circuitry has a high-speed primary 
slew rate and ultra-wide bandwidth. By feeding back only the 
distorted components of an audio signal, the unit maintains 
the pure sound quality of the main-amplifier that is almost 
non-feedback.
The ODNF-u system lowers impedance and raises S/N ratio 
of the transmission circuitry thanks to the quadruply paral-
lelized first stage and Darlington-connected second stage 
amplification circuitry.
In addition, the input stages of the error detection circuitry 
are triple-parallelled to improve distortion and noise charac-
teristics.
Use of a cascode circuit and the introduction of a dual tran-
sistor to the current mirror circuit suppresses variation be-
tween elements and improves error detection accuracy.

BD34301EKV manufactured by ROHM Co., 
Ltd. equipped 

This unit features ROHM's BD34301EKV DAC chips in inde-
pendent left and right dual monaural configuration.

USB input 768 kHz/32-bit supported

The B-type USB input terminal makes it possible to input dig-
ital audio signals from a PC or Mac with a sampling frequency 
of up to 768 kHz and 32-bit quantization.

USB input supports DSD

DSD formatted data can be read from PC or Mac, or the like.
Sampling frequencies of 2.8 MHz/5.6 MHz/11.2 MHz/ 
22.4 MHz are supported.

Asynchronous communication supported

The USB input's low jitter characteristics have been achieved 
by a dedicated DSP chip using asynchronous communica-
tion and PLL.

MQA (Master Quality Authenticated)

MQA is an award-winning British technology that delivers the 
sound of the original master recording.
The master MQA file is fully authenticated and is small enough 
to stream or download.

Visit mqa.co.uk for more information.

This unit includes MQA technology, which enables you to play 
back MQA audio files and streams from all digital inputs, de-
livering the sound of the original master recording. D-10X is a 
CD player that can recognise an MQA-CD. The built-in MQA 
decoder will automatically restore the high-resolution signal 
heard in the studio and confirm it, using the authentication 
signature.

――

   2-channel-specific 

Super Audio CD/CD Compatible Player