16
Operations
How to play
1. Connect the stylus light to the stylus light connector to
turn on the light for record playback in the dark.
2. Put a record on the platter while aligning the center
hole of the record with the center spindle.
For an EP record, use the EP adaptor.
3. Select a rotation speed (33 or 45) with the rotation
speed selection switch in accordance with a record
and press the start/stop switch.
4. Raise the arm lifter, disengage the tone arm from the
arm rest, and move the tone arm to a position where
you like to play.
5. Lowering the arm lifter allows the tone arm to be
lowered and playback to start.
6. After playback ends, raise the arm lifter, put the tone
arm back on the arm rest, and press the start/stop
switch to stop the platter.
To prevent the stylus tip and records from being damaged,
use the arm lifter for vertical movement of the tone arm if
possible.
The tone arm in the illustration is an example.
Rotation speed fine tuning volume
(speed control)
Start/stop switch
Stylus light
connector
Rotation speed
selection switch
