BELT DRIVE ANALOG PLAYER PD-171AL
7
4. Rotation speed selection switch (33/45)
This switch toggles the rotation speed of the platter be-
tween 33 rpm and 45 rpm.
Select a rotation speed in accordance with a record to listen
to.
5. Stroboscope
Adjust the rotation speed fine tuning volume (speed control)
so that the number (33 or 45) in the stroboscope seems to
be motionless.
6. Rotation speed fine tuning volume
(33/45 speed control)
33 rpm Adjusts so that the number (33) in the stroboscope
seems to be motionless by setting the rotation
speed selection switch to 33.
45 rpm Adjusts so that the number (45) in the stroboscope
seems to be motionless by setting the rotation
speed selection switch to 45.
7. Stylus light connector (light)
This light can illuminate stylus area in a dark room.
Remove the dustproof cap and mount the supplied stylus
light.
8. Pulley cover
This cover protects the rotating pulley.
Be sure to mount the cover when the platter is rotated.
9. Center spindle
This spindle is a guide for mounting a record.
For playing an EP record, mount the supplied EP adaptor
here.
10. Belt
This belt transfers motor rotation to the platter.
11. Rubber mat
This rubber mat suppresses platter squeaks and brings a
record into intimate contact with the platter.
12. Arm base cover
Change to the optional arm base and mount a tone arm.
Refer to "4. Tone arm mounting" on page 11 for the optional
arm bases and applicable tone arms.
