53
-
Send E-mail
Send an electronic text message. Beside the Send Email check box, click
Detail
.
In the E-mail Setting dialog box, click
OK
to exit and save the setting and
Cancel
to exit without saving
the setting.
(2)
(3)
(1) Mail Server
Enter the
SMTP Server
and
port
. If your e-mail system requires user identification, enable
Authentication
check box and enter
ID
and
Password
.
(2) Mail
Fill the mailing information.
From:
Enter the sender e-mail address.
To and CC:
Enter the recipient email address and separate it with comma or a semicolon (;).
Subject:
Enter the message title.
Message:
Type the message.
-
Start Recording
Record the video from the selected camera.
1. Beside the Start Recording check box, click
Detail
.
2. In the Alarm Recording Setting dialog box,
select the camera to enable/disable video
recording. Enable
All
to select all cameras.
3. In the Frame Rate selection, select
As Setting
to record the number of frames based on the
Recording Setting.
4. In the
Start Record prior
text box, mark and
set the number in second for the program to
begin recording after the alarm has been trigger.
The time range is 1~10 seconds.
5. In the
Stop Record after
text box, mark and
set the number in second for the program to
continue recording after the alarm has ended. The time range is 1~999 seconds. If user doesn
’t mark
and set the time, the alarm recording will continue recording until alarm is reset.
6. Click
OK
to accept the new settings and
Cancel
to exit without saving.
