3. Keyboard rail, 1/2 of extension rail & lift bracket are factory assembled
Install Metal Dowel Pins & Shoulder Screws on BOTH Side Panels as shown above. Shoulder screws - Threaded
end into the holes shown above and tighten until fully seated - do not overturn!
Metal dowel pins - Press into hole shown above.
Brown shelf pins *These may also be placed later if you are unsure of where you would like your interior shelf.
Camlock - insert into predrilled hole making sure that the side with the slot for screwdriver is facing outward and
that the opening is where the camlock screw sill fit when panels are put together.
*Hinge plates are shown above for placement only. Do not attach at this time. Refer to this page throughout
assembly.
****The RIGHT SIDE PANEL IS SHOWN ABOVE (#1) - THE LEFT SIDE (#2) IS THE MIRROR IMAGE WITHOUT THE
HOLES FOR HINGE PLATES.
Page 2
