3.3 sElECtion of a suitablE assEMbly raCk
+
The assembly rack for the module must be made of
durable, corrosion- and UV-resistant material.
+
The assembly rack must be sufficiently sized for the
regionally occurring snow and wind loads.
+
The modules with the four anchorage points must
be securely fastened to the assembly rack.
Additional anchorage points must be provided in
case of the occurrence of increased snow and wind
loads. Please refer to the following drawing for
detailed information. Load calculations are per-
formed by the system designer or installer.
+
Depending on the assembly rack, the modules
can be fastened to the assembly rack by means of
bolted connections or module clamps.
+
Adhere to the instructions and safety precautions
of the assembly rack manufacturer.
a
¼a
½a
¼a
Eco Line 60 / 240 – 250 W:
a = 1,640 mm
Eco Line 60 / 225 – 235 W:
a = 1,640 mm
Eco Line 72 / 180 – 190 W:
a = 1,580 mm
3.4 typEs of assEMbly
Caution!
Danger of material damage!
Treat the modules with great care during
unpacking, transport and assembly. Do not
enter the modules. Avoid bending. Do not
use the cables or junction box as a handle.
!
Summary of Contents for eco line 60/225-235W
Page 1: ...ECo line Modules correctly mounted...
Page 2: ...Table of contents...
