1.7 rEgulatory proVisions
All technical rules for planning, installation and
operation of PV systems must be adhered to.
The following standards and regulations merely
represent an excerpt:
+
DIN VDE 0100 Installation of power installations
with nominal voltages up to 1,000 V
+
VDI 6012 p. 2 Local energy systems in buildings
+
DIN 1055 Load assumptions for structures
+
VDE 0185 Lightning protection
+
BGR 203 Safety regulations of the trade associa-
tion for roof work
+
BGV A2, A3 Electrical systems and equipment
+
Regulations of the central organisation of the
German roofing craft – professional association of
roofing, wall and waterproofing technology
+
Regulations of the local grid operators
+
Regional building regulations
1.8 produCt idEntifiCation
Each module has labels on the back containing the
following information:
+
Identification label: describes the product type; rat-
ed output, rated current, rated voltage, open circuit
voltage, short circuit current acc. to the standard
conditions, as well as the maximum system voltage,
dimensions and weight and the position of the
mounting holes and other technical specifications
can be taken from the datasheets provided.
+
Barcode: Each individual module has a unique
serial number. There is only one barcode on each
module. It is permanently attached to the inside
of the module and is visible from the front. This
barcode is inserted before lamination
Caution!
Removal or defacing of one or several labels
is not permissible! In case of infringement, all
guarantee claims become null and void!
!
Summary of Contents for eco line 60/225-235W
Page 1: ...ECo line Modules correctly mounted...
Page 2: ...Table of contents...
