I N S T R U C T I O N S
Pulse Hub Integration With Savant
Instructions For Authorized Savant Dealer
Integration Diagram
No Wi-Fi Hub Detected
Make sure that your serial connection in Blueprint is assigned to the correct serial output of the Savant controller.
Confirm you are using the RS232 adapter supplied by LuXout Shades.
Shade Limits Are Not Set Properly
Calibrate shade limits with your remote control.
Shade Is Not Moving At All
Make sure the profile you’re using is for the exact model of controller that’s being used and confirm your addresses in
the Shade Data Table with those used on your remote control.
I Have Multiple Wi-Fi Hubs, What Do I Do
Add one Wi-Fi Hub (LuXout Automate Pulse Hub) profile for each physical Wi-Fi Hub being used on site. Make sure the
addresses in your Shade Data Table are set to be used for the correct Hub, as specified in the “Controller” section of
the data table.
How Do I Scan For Available Hubs
Once the Wi-Fi Hub (LuXout Automate Pulse Hub) is properly connected via the
RS232 to RS485 adapter, navigate to the Hub Properties page within Composer.
Select “Retrieve Hubs” located in the driver actions tab.
RS232
Adapter
DB9/RJ11
Adapter
RJ11 Plug
RJ9/RJ11 Cable
RJ9
Plug
Wi-Fi Hub Connections
1). RJ485
2). RS485
Savant
Support
877.savant.5
M - F: 9am - 9pm EST
Hub
Frequently Asked Questions
S P E C I F I C A T I O N S U B M I T T A L
Job Name:
Model Numbers:
Job Number:
I-107
1221 Admiral Street Richmond VA 23220 800-817-1204 LuXoutShades.com