6
AGS-1008M
Quick Install Guide
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
Desktop Setup
For use as a desktop device, position and apply the included rubber feet to the
bottom of the AGS-1008M
Installing the Rubber feet to the AGS-1008M
AGS-1008M INSTALLATION
Connecting Devices
Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect the AGS-1008M to
a device as described below (CAT6 must be used in order to achieve full Gigabit
bandwidth). The AGS-1008M will automatically adjust to the characteristics
(speed/duplex) of the device to which it is connected.
Connecting the AGS-1008M to a Device
When a device is properly connected, the Link/Activity LEDs for each port lights
up green/orange. Please refer to the LED Indicators section for defi nitions and
troubleshooting.
Powering Devices
When you want the device powered by PoE connect the AGS-1008M to another
switch through the PoE In port. When you want the AGS-1008M to be powered by
AC, plug the AC power adapter into a wall outlet and into the Port on the Device.
