background image

Fold

Fold

Fold

RE

AD 
ME 
FIRS

T

QUICK INSTALL GUIDE

Epic 4

Multi-WAN Gigabit Router

XBR-4500

Includes:

 

„

Multi-WAN Gigabit Router 

 

„

Rack Mounting Ears (2)

 

„

Rubber Feet (4)

 

„

Power Cord

SETUP AND CONFIGURATION

1

Physical Installation

The Epic 4 can be rack-mounted or used as a desktop router. Install  

it in a stable/safe place to avoid any possible damage. Make sure  
there is adequate space around the router for ventilation and proper  
heat dissipation. Avoid placement in direct sunlight. Do not place heavy 
articles on the router and verify the ground connection of the outlet  
is functioning properly.

Desktop/Shelf Installation

For desktop/shelf installation, attach the four rubber feet to the corner 
indentations on the bottom of the router, then place it on  

a solid, level platform.

Rack Installation

Use the included L brackets for convenient installation in a 19-inch server or 
AV rack. As shown below, use four screws to attach the L-shaped brackets on 

either side of the router, and mount the switch horizontally in the rack. Use 

your desired hardware to affix the router supports to the rack.

 

 

Install Brackets for Rack-Mounting                 Attach Feet for Desktop Installation

2

Connecting Ethernet and Power

Before installing the router, test the Internet connection to verify that it 

is functioning properly. Once Internet access is confirmed to be working, 

follow the steps below for installation and configuration. 

Connecting Ethernet

Luxul recommends Category-5, super Category-5 or Category-6 unshielded 

twisted pair (CAT5/CAT5e/CAT6 UTP). To ensure best performance and 
stable data transmission at 1000 Mbps, use Category-6 shielded twisted pair.

1. 

Connect the WAN: 

Connect the Internet cable from a telco/ISP 

modem/router to the dedicated WAN 1 port on the router.

2. 

Connect the LAN:

 Connect a cable from the dedicated LAN 1 port on 

the router to a switch, access point, or computer.

For best performance, and to maximize available ports, Luxul recommends 

connecting all LAN devices to a Luxul switch, then connecting that switch 

to the Epic 4 LAN port via a single Ethernet cable.

 

n

NOTE:

  WAN 1 and LAN 1-4 are configured by default. The router  

must be configured to provide additional WAN ports

.

 

n

NOTE:

  Connect all LAN devices to a Luxul switch, then connect that 

switch to the router for best results.

Connecting Power

Use the included power cable to connect the router to a surge-protected 

outlet. The AC input socket and power switch are on the rear panel. The 
built-in power supply supports 100~240VAC at 50/60Hz. 

Sales

P: 801-822-5450 

E: sales@luxul.com

Technical Support

P: 801-822-5450 Option 3 
E: support@luxul.com

LUX-QIG-XBR-4500-v5 02221701

Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission in 

writing from Luxul. The material in this document is subject to change without notice. Luxul reserves the 

right to make changes to any product to improve reliability, function, or design. No license is granted, either 

expressly or by implication or otherwise under any Luxul intellectual property rights. An implied license 

only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2016 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply 

Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and 

registered trademarks are property of their respective holders.

Summary of Contents for EPIC 4









Reviews: