QUiCK inStAll gUide
FIGURE 2
optional Poe (Power over ethernet) (Figure 3)
1. Connect the Ethernet cable from the Ethernet pass through to the “48V POE IN” port of
the Wi-Fi Signal Booster.
2. Connect the next Ethernet cable from the “POE OUT” of the Wi-Fi Signal Booster to the
“10/100M” port of your Netgear AP, (See AP’s documentation).
3. Be sure all cables are connected securely and power up your POE injector.
4. You may now power your POE injector.
optional Poe with the Poe-1Port Injector (Figure 4)
Install the optional POE injector where you have
access to your data/network source Ethernet cable and
power sources.
Note:
The POE-1Port is a non 802.3af/at
compliant injector
FIGURE 3
FIGURE 4
Data
Source
Power
Source
Data
In
(Ethernet)
Power
In
Data/Pwr
Out
(Ethernet)
POE-
1port
Injector
INPUT
POE
OUT
POE
IN
ANTENNA
48V
DC IN
Power
Supplies
INPUT
POE
OUT
POE
IN
ANTENNA
48V
DC IN
