IAD SERIES USERS MANUAL
68
enable this function. It is recommended to turn on all preventive functions without special requirements. Open the
TCP Flood attack defense, UDP Flood attack defense and ping Of Death attack defense, you can set the connection
limit according to the traffic Of the server under normal circumstances, generally keep the default value.
7.System management
Before configuration, please click "system management" at the top of the page to enter the system management
page.
System management to manage the hostname, time, password, backup and recovery, upgrade, remote management,
restart, recovery of factory values, diagnostic tools, Bypass Settings and logs.
7.1 Basic setting
Select "system management > basic Settings" and enter the "basic Settings" page as shown in figure 7-1.
Figure 7-1 Basic setting
7.2 Web manage
Select “system management> Web Manage” and enter the web manage page as following
7.2 Web manage
The system has a default HTTP port of 80 and an HTTPS port of 443. You can modify the WEB
administration port as you like, but generally you don't need to. The device was not operated on during the
administrative timeout, and you need to log in the device again to continue the configuration.If whitelist is enabled,
only computers with whitelist IP addresses are allowed to manage the WEB
