IAD SERIES USERS MANUAL
16
Figure 2.1 Application environment
2.2.2 First time use and basic connection and configuration
When for the first use, the product must be installed by the engineer. If you (enterprise network administrator or
responsible person) need to adjust the equipment during the use, please refer to the following instructions.
2.2.3 1 Set up wire connection
Please connect to this product following the instruction below.
2.2.3.1 Connect the uplink Ethernet interface
Connect the uplink Ethernet interface (WAN/ LAN port 1) and the operator's access information point with
network cable. (work in Ethernet mode)
Figure 2-2 connects to uplink Ethernet (WAN)
2.2.3.2
Connect the LAN port
Connect the Lan ports(LAN 2-4) of the equipment with the network adapter of the user’s computer or other
network equipment with network cable.
Figure 2-3 connect to LAN
2.2.3.3
Connects to telephone
Connect the analog FXS port and analog telephone with the telephone line with RJ-11 interface.
2.3.3.4 Connects to the power adaptor
