IAD SERIES USERS MANUAL
46
interface is the interface connect with IGMP router,which can be WAN 5 or WAN sub-interface according to the
drop-down box.
5.Voice Configuration
Voice configuration includes operate,SIP user set,SIP server set, Digitmap ,Codec set,IAD global set and
Suppservice.
Before voice setting, please click "voice set" at the top of the page to enter the voice setting page.
5.1 Operate mode setting
Select<Voiceset> <Voicework> and <Operate> enter into the page as shown below:
5-1 Operate mode setup
The working mode is "IAD", and this product is used as integrated access device.
Select IMS in voice mode, click < voice_parameter_overloading >, and configure the parameters of device
docking with IMS network; Select NGN network in the voice mode, click < voice_ parameter_overloading >, and
configure the parameters of device docking with NGN network; Select H. 248 protocol for the voice mode, click <
voice_parameters_overloading >, and configure the parameters for the device to interface with the MGC gateway.
5.2 SIP USER SET
When selecting "IMS" or "NGN" in the voice mode, select <Voice set>and <Voice work>then click the tab<SIP
USER SET>" and enter the "SIP user setting" page as shown in figure 5-2.