IAD SERIES USERS MANUAL
77
Figure
7
- 13 Debug
Step 2 Select the diagnostic tool needed and enter the IP addr or Domain Name of the destination device in the
Diagnostic Address text box.
Step 3 Click the “Run”button to start the debug.
Result
The result will be displayed in the text box below.
7.10 Time Settings
Select “System > Time Settings” to enter “Time Setting” page as shown in Figure 10-14.
There are two ways to set the system time. Obtain time through internet and manually set the system time.
By default, the product obtains the time through NTP server.
Network Time Protocol (NTP) is used to provide time synchronization between routers, switches, and
workstations. The function of time synchronization is to look at the related event records of multiple network
devices to help analyze more complicated faults and security incidents.
NTP server to obtain time in two ways:
When the product is connected to the Internet, it automatically obtains the time from the default NTP
server of the device (this method is adopted by default).
Enter the specified NTP server address, the product obtains the time from the specified NTP server.
Figure
7
- 14 Time Settings
System Basic Configuration Page description:
Table 7- 3 Time Configuration
Item
Description