background image

The 

OPTIMA-RF BASIC PLUS

 surface-mounted radio thermostat has been developed to be able to 

switch electric and conventional heating- or cooling systems on and off using a set temperature and 
time.

Large display can be clearly read with the background lighting.
Easy to fit thermostat and receiver.
Four buttons make it easy to use.
The display shows the set temperature as well as the measured temperature and time.
Temperature display in degrees Celsius.
Huge temperature range from 3°C up to 50°C.
Battery status display.
For heating or cooling.
Can be used also for automatic heating or cooling by heatpump. 
The thermostat is supplied with a wall-fixing frame, base and a very compact receiver (flush-mounted or surface-mounted).

Thermostat operating voltage:

2 x AAA 1.5 V, alkaline batteries.

Backup storage:

EEPROM

Receiver operating voltage:

230 VAC, 50/60 Hz

Maximum voltage / (ohmic) load:

250 VAC/10 A.

Maximum voltage / (inductive) load:

250 VAC/3 A.

Frequency:

868 MHz.

Channel selection:

By programming the thermostat and the receiver.

Switching options:

N A.

Switching thermostat (input):

Heating or cooling, automatically heating or cooling

Receiver switch contacts:

NO and NC.

Temperature settings:

3°C ~ 50°C, 0.5°C increments.

Accuracy:

+/- 0.5°C (+/- 1°F).

Thermostat dimensions:

Surface mounted, 134 mm x 94 mm x 28 mm.

Display dimensions:

69 x 49 mm.

Receiver dimensions:

Flush-mounted/surface mounted, 86 mm x 86 mm x 23 mm.

Colour:

White

IP protection rating thermostat:

30.

IP protection rating thermostat:

21.

Certification:

CE.

Always switch off the voltage when carrying out installation work.
Read the operating instructions fully before installing the thermostat and the receiver.
The thermostat must be installed by a professional.
Installation must be carried out in accordance with (N)EN standards (within the EU).
Only use the thermostat as outlined in the operating instructions.
Always use alkaline batteries (e.g. Duracell) and charged batteries in the thermostat battery holder.

1

RF-OPTIMA BASIC

 

PLUS THERMOSTAT

       

Technical data:

       

Advice

:

        

Options for and advantages of the OPTIMA-RF BASIC PLUS thermostat:

Summary of Contents for RF-OPTIMA BASIC PLUS

Page 1: ...C 3 A Frequency 868 MHz Channel selection By programming the thermostat and the receiver Switching options N A Switching thermostat input Heating or cooling automatically heating or cooling Receiver switch contacts NO and NC Temperature settings 3 C 50 C 0 5 C increments Accuracy 0 5 C 1 F Thermostat dimensions Surface mounted 134 mm x 94 mm x 28 mm Display dimensions 69 x 49 mm Receiver dimension...

Page 2: ...in the top left corner Use the F and G buttons to set the temperature value This value can be adjusted by 8 to 8 C Press the SET E button on the thermostat to save this function and leave the menu Press the O C button to turn on the thermostat B C D E RF OPTIMA BASIC PLUS THERMOSTAT Location coding Channel selection A Calibrating the thermostat temperature Setting the time day and temperature on t...

Page 3: ...lectric heating element 230VAC 10A Thermostat connection Boiler Heat or cool mode automatic heat or cool mode The RF thermostat has on the backside 3 pins which is connecting a green or black terminal on the mounting plate which can be used for heating or cooling mode The default setting is heat but when the terminal 7 and 6 are being connected the thermostat is set for cool mode This connection c...

Page 4: ...eceiver with care the thermostat and the receiver have sensitive electronics The OPTIMA RF BASIC PLUS cannot tolerate moisture and extreme heat ensure that the thermostat and the receiver are suitably protected We hope you enjoy using the OPTIMA RF BASIC PLUS thermostat If you have any questions please contact Copyright LVDS 4 Miscellaneous RF OPTIMA BASIC PLUS THERMOSTAT ...

Reviews: