MagniLink PRO - PC
User Manual 7944070a | MagniLink PRO - PC
43
10
Troubleshooting
No image is displayed on the screen after you start the system:
Check that the power is on.
Check that all connectors are properly connected as explained in
the 'Installation' section.
The LED shines red for five seconds.
The battery needs to be charged. Connect the mains adapter to
the units to charge the battery.
It is not possible to start the system and the On/Off button flashes
(orange/red).
Press the On/Off button for more than six seconds to reset the
system.
Never remove any panels or the casing in order to attempt to repair the
system yourself. In the event of problems, contact your local dealer.