MagniLink PRO - PC
User Manual 7944070c | MagniLink PRO - PC
23
8.5
Using the software
The software can be started from the icon on the desktop, from the start
menu or using the short cut command Ctrl + Alt + S.
8.5.1
Functions via menus
The application consists of a window with tabs and groups of buttons.
There is a tab for application settings and another tab for handling the
camera. Depending on whether the system is licensed for OCR, there is
also a tab for handling the OCR processed text.
1.
Change colours
Used to change between natural and artificial colours.
2.
Decrease magnification
3.
Increase magnification
4.
Overview mode
Reduces magnification to overview mode. Click again to restore
the magnification. When overview mode is active, a sight is
displayed in the middle of the video window.
5.
Lock autofocus
Locks the autofocus mode. This can be used when you wish to
write by hand. In this way, autofocus is not affected by the pen or
your hand. Press the button a second time to reactivate autofocus.
6.
Focus up
Reduce focus distance. When this function is used, autofocus is
turned off.
7.
Focus down
Increase focus distance. When this function is used, autofocus is
turned off
8.
Reduce brightness/contrast
9.
Increase brightness/contrast
10.
Reference line/bar left/up
Adjust the position of the reference line. Press the button to move
the reference line to the left. Hold the button in to change the
reference line to horizontal and move it upwards. The reference