User Guide 79 45 816a | MagniLink Vision Split
17
14.
Programmed magnification (and direction for distance
cameras)
The three buttons marked (I), (II) and (III) are used to quickly select pre-
programmed settings for a given space and/or camera magnification.
The distance camera can be programmed with the desired
magnification to quickly point to three different locations in the room.
The reading camera can be programmed with the desired
magnifications and selection of artificial colours.
Point the distance camera at the desired location in the room and
adjust the magnification. Hold down one of the buttons marked (I),
(II) or (III) for three seconds to save the position. The orange frame
briefly turns thicker to indicate that the position has been saved.
The programmed modes can now be selected by briefly pressing
one of the three buttons.
15.
Operating the distance camera
These buttons are used to adjust the distance camera horizontally
and vertically. The camera can be adjusted both horizontally and
vertically at the same time. The speed is automatically adjusted
and is dependent on the level of magnification.
(The limits and speeds of the pan and tilt can be adjusted using the EUC
software. Please contact your local retailer if you have any questions.)
