MagniLink Zip
8
User Manual 7943529c | MagniLink Zip
3
Safety information
x
Only use the power adaptor supplied with the product. Using an
incorrect type of power adapter may cause damage to the system.
x
Place the power cord in such a way that you can neither trip over it
or that crush damages can occur.
x
If the product is moved from the cold into a warm room,
condensation (moisture) can form inside the unit or on the camera
lens. To prevent problems with condensation, the apparatus should
be installed in the room at least 30 minutes prior to usage.
x
Never operate the product if it has been exposed to water or other
liquids. Damaged or wet product can cause electric shocks or fire.
x
Only use the battery supplied with the product. If the battery needs
to be changed, please contact LVI.
x
If the system requires cleaning, pull out all cables and use a slightly
damp (not wet) cloth. Use only water or a cleaning agent that is
intended for monitors and computers.
x
Be careful not to catch your fingers when collapsing your
MagniLink Zip or when adjusting the position of the screen. Do not
place any objects on the reading table when the product is
collapsed as they can damage the screen.
x
Collapse your MagniLink Zip when it needs to be moved. Always
lock the reading table and do not lift the screen or reading table as
these are moving parts.
x
Make no further adjustments, even if the product does not function
normally after following the functional descriptions. Pull out the
power cable and contact service staff or the product distributor.
Only use spare parts that are specified by LVI.
x
Always switch off the power when the system is not being used.
If in doubt, contact your supplier.
Warning
The product is supplied packed in a plastic bag. To avoid risk of
suffocation, keep the bag out of the reach of children and infants.
