MagniLink Zip
User Manual 7943529c | MagniLink Zip
13
7.2
Menu
The menu is opened by pressing the function control. In order to
navigate in the menu, turn the function control. The current mode is
displayed on the screen. After 30 seconds of inactivity, the system returns
to normal mode.
1.
Autofocus ("AF-ON" or "AF-OFF" is displayed on the screen)
In this mode, you can press the function control to turn autofocus
on and off. Autofocus off can be used when you wish to write by
hand. In this way, focus is not affected by the pen or your hand.
2.
Mirroring ("MIRROR" is displayed on the screen)
In this mode, you can press the function control to mirror the
image.
3.
Focus ("FOCUS" is displayed on the screen)
In this mode, you can press the function control. When you do so,
"F-SET" is displayed on the screen and it is then possible to set
the focus mode manually by turning the function control. Manual
focus may, for example, be useful for inspection. When this has
been done, press the function control again to return to the menu.
4.
Reference line/Bar ("REFLINE" is displayed on the screen)
Press the function control in this mode and "SELECT" is displayed
on the screen. Then turn it to choose between vertical reference
line, horizontal reference line, vertical bar or horizontal bar. Then
press the control. "R-SET" is then displayed on the screen and it is
possible to set the mode for the reference line or bar by turning
the control. When this has been done, press the control again to
return to the menu.
5.
Lighting ("LAMP" is displayed on the screen)
Press the function control in this mode to access the settings for
the lamp's brightness. "L-SET" is displayed on the screen and it is
possible to reduce or increase the brightness by turning the
function control. When you are satisfied with the brightness, press
the function control again to return to the menu.
