Confirm body size
will fit in fixture ballast channel prior
to installation.
Slim Fixture Mount Installation
2
Application
In the past, all emergency lights were left on 24 hours a day to meet safety codes. Now you can
specify & install a
UL924 Listed Emergency Shunt Relay LUT-SHUNT-FM,
which converts a
normal light fixture into an approved emergency light. During normal operation, the LUT-SHUNT-FM
switches designated emergency light on and off. During a utility power interruption, the
LUT-SHUNT-FM turns designated emergency light on, regardless of switch position.
Intended for use with switching and line voltage dimming controls.
What is the difference between a
SHUNT and an ALCR?
An emergency shunt relay requires a dedicated switch/dimmer to control the emergency
lights. In other words, the switch/dimmer must be wired on the emergency power circuit.
An automatic load control relay allows the same switch/dimmer to control both normal and
emergency lights. In other words, the switch/dimmer can be wired on the normal power
circuit.
