Page A - 51
A
LW 170 E / LW 170 D Nautic
Version: 15.10.2019
Oil change
Oil change as follows:
• Run compressor warm for about 2 minutes.
• Switch off and vent compressor.
• Tilt the compressor aside.
• Place a suitable oil drain tray under the drain plug (red
marked hexagon bolt).
• Screw off red oil drain plug carefully.
• Drain oil.
• Screw in red oil drain plug and tighten.
• Remove oil cover (Fig. 1) and fill with oil. (Fig. 2)
• Check oil level.
• Check condition of oil cover o-ring and install the oil cover.
The oil change is now complete.
Maintenance intervals
• First oil change at 10 operating hours (total hours).
• Second oil change at 30 operating hours (total hours).
• Third oil change at 100 operating hours (total hours).
• All further changes after each 100 operating hours.
Oil and oil capacity
Approx. 800 ml synthetic compressor oil is necessary for one oil change. Only use synthetic com-
pressor oil which is recommended as suitable from L&W. (P/N: 000001)
Only LW 170 D Nautic
Drive motor oil change intervals: see manufacturer's specification for the drive motor.
(L&W P/N: 000004)
(Fig.1) Oil cover
(Fig.2) Fill with oil
M A I N T E N A N C E A N D S E R V I C E
Note
We recommend oil change at least once a year - depending on total operating hours.
i
Summary of Contents for LW 170 D Nautic / AL
