manualshive.com logo in svg

LXE 8650, User Manual

The Honeywell 8650 User Manual is here for free download, providing detailed instructions and guidelines for operating this exceptional product. With this manual, users can easily navigate through the features and functions of their Honeywell 8650. Don't miss out on this essential resource, available exclusively at 88.208.23.73:8080.

Share
Download
background image

iv 

Table of Contents 

Bluetooth Ring Scanner Guide 

E-SW-BLUESCANPG-A 

Code 32 Prefix .............................................................................................................................................. 111

 

Convert Code 39 to Code 32........................................................................................................................ 111

 

Code 39 Full ASCII Conversion.................................................................................................................. 112

 

Set Lengths for Code 39............................................................................................................................... 113

 

One Discrete Length (Parameter L1).........................................................................................................113

 

Two Discrete Lengths (Parameter L2).......................................................................................................114

 

Length Within Range.................................................................................................................................114

 

Any Length ................................................................................................................................................114

 

Transmit Code 39 Check Digit .................................................................................................................... 115

 

Trioptic Code 39 ........................................................................................................................................... 116

 

Code 93............................................................................................................................................................. 117

 

Set Lengths for Code 93............................................................................................................................... 117

 

One Discrete Length (Parameter L1).........................................................................................................118

 

Two Discrete Lengths (Parameter L2).......................................................................................................118

 

Length Within Range.................................................................................................................................119

 

Any Length ................................................................................................................................................119

 

Discrete 2 of 5 ..................................................................................................................................................120

 

Set Lengths for Discrete 2 of 5.....................................................................................................................121

 

One Discrete Length (Parameter L1).........................................................................................................121

 

Two Discrete Lengths (Parameter L2).......................................................................................................121

 

Length Within Range.................................................................................................................................122

 

Any Length ................................................................................................................................................122

 

Interleaved 2 of 5.............................................................................................................................................123

 

I 2 of 5 Digit Verification..............................................................................................................................124

 

Convert I 2 of 5 to EAN-13..........................................................................................................................125

 

Set Lengths for I 2 of 5.................................................................................................................................126

 

One Discrete Length (Parameter L1).........................................................................................................126

 

Two Discrete Lengths (Parameter L2).......................................................................................................127

 

Length Within Range.................................................................................................................................127

 

Any Length ................................................................................................................................................128

 

Transmit I 2 of 5 Check Digit ......................................................................................................................128

 

MSI Plessey......................................................................................................................................................129

 

MSI Plessey Check Digit Algorithm ...........................................................................................................129

 

MSI Plessey Check Digits ............................................................................................................................130

 

Set Lengths for MSI Plessey........................................................................................................................131

 

One Discrete Length (Parameter L1).........................................................................................................131

 

Two Discrete Lengths (Parameter L2).......................................................................................................131

 

Length Within Range.................................................................................................................................132

 

Any Length ................................................................................................................................................132

 

Transmit MSI Plessey Check Digit .............................................................................................................133

 

UPC/EAN.........................................................................................................................................................134

 

UPC-A ...........................................................................................................................................................134

 

UPC-E ...........................................................................................................................................................134

 

UPC-E1 .........................................................................................................................................................135

 

EAN-8............................................................................................................................................................135

 

EAN-13..........................................................................................................................................................136

 

Bookland EAN..............................................................................................................................................136

 

Check Digits..................................................................................................................................................137

 

Transmit UPC-A Check Digit....................................................................................................................137

 

Transmit UPC-E Check Digit ....................................................................................................................137

 

Transmit UPC-E1 Check Digit ..................................................................................................................138

 

Conversions...................................................................................................................................................139

 

Convert UPC-E to UPC-A.........................................................................................................................139

 

Convert UPC-E1 to UPC-A.......................................................................................................................139

 

Convert EAN-8 to EAN-13 Type ..............................................................................................................140

 

Preambles......................................................................................................................................................141

 

UPC-A Preamble .......................................................................................................................................141

 

UPC-E Preamble........................................................................................................................................142

 

Summary of Contents for 8650





















































































































































































































































































































Reviews:

No comments

Related manuals for 8650

Canon IMAGE FORMULA DR-6010C Easy Start Manual preview
IMAGE FORMULA DR-6010C
Brand: Canon Pages: 2
Canon DR-X10C - imageFORMULA - Document Scanner Easy Start Manual preview
DR-X10C - imageFORMULA - Document Scanner
Brand: Canon Pages: 2
Canon DR-6080 Maintenance Manual preview
DR-6080
Brand: Canon Pages: 22
Canon DR-4580U Maintenance Manual preview
DR-4580U
Brand: Canon Pages: 12
Canon DR 5010C - imageFORMULA - Document Scanner Easy Start Manual preview
DR 5010C - imageFORMULA - Document Scanner
Brand: Canon Pages: 2
Canon DR 2010C - imageFORMULA - Document Scanner Easy Start Manual preview
DR 2010C - imageFORMULA - Document Scanner
Brand: Canon Pages: 2
Canon CR-50 User Manual preview
CR-50
Brand: Canon Pages: 14
Canon CP Printer Solution Disk Version 4 Quick User Manual preview
CP Printer Solution Disk Version 4
Brand: Canon Pages: 16
Canon CanoScan N676U Specification preview
CanoScan N676U
Brand: Canon Pages: 2
Canon CANOSCAN N650U Getting Started Manual preview
CANOSCAN N650U
Brand: Canon Pages: 6
Canon CanoScan LiDE 35 Quick Start Manual preview
CanoScan LiDE 35
Brand: Canon Pages: 14
Canon DR 5010C - imageFORMULA - Document Scanner Startup Manual preview
DR 5010C - imageFORMULA - Document Scanner
Brand: Canon Pages: 96
Canon 700F - CanoScan LiDE Quick Start Manual preview
700F - CanoScan LiDE
Brand: Canon Pages: 19
Sharper Image 205799 User Manual preview
205799
Brand: Sharper Image Pages: 7
GRAPHTEC SK200-09 User Manual preview
SK200-09
Brand: GRAPHTEC Pages: 57
Gendex DenOptix QST Operator'S And Service Manual preview
DenOptix QST
Brand: Gendex Pages: 68
Conrad Magicscan MS802 Operating Instructions preview
Magicscan MS802
Brand: Conrad Pages: 4
Snap-On 60100001 Quick Manual preview
60100001
Brand: Snap-On Pages: 10

Brands by name

Popular brands

Load more brands