Setting Display Backlight Action
21
E-EQ-MX6PCRG-C-ARC
MX6 PPC Reference Guide
Dim Backlight if device is not used for:
When “Dim Backlight if device is not used for:” is checked and a time delay is set, the backlight
on the display dims to the minimum value in Backlight Intensity when the timer expires.
•
Tapping the screen after the time delay timer expires, undims the screen backlight.
•
Tapping any key after the time delay timer expires, turns the screen backlight on if “Turn
on backlight when a button is pressed or the screen is tapped” is checked.
When unchecked, the display backlight does not dim to the minimum level.
If the unit is in the Suspend state, pressing any key (other than the Power key) or tapping the
screen have no effect. Wake the MX6 PPC from Suspend by tapping the Power key, pressing the
trigger on the handle or by pressing the Scan button.
Turn off backlight if device is not used for:
When “Turn off backlight if device is not used for:” is checked and a time delay is set, the display
backlight turns off when the timer expires.
•
Tapping the screen after the time delay timer expires, turns the screen backlight on.
•
Tapping any key after the time delay timer expires, turns the screen backlight on if “Turn
on backlight when a button is pressed or the screen is tapped” is checked..
When unchecked, the display backlight does not turn off.
If the unit is in the Suspend state, pressing any key (other than the Power key) or tapping the
screen have no effect. Wake the MX6 PPC from Suspend by tapping the Power key, pressing the
trigger on the handle or by pressing the Scan button.
Turn on backlight when a button is pressed or the screen is tapped
When this option is unchecked, the MX6 PPC backlight utility ignores key taps and screen taps. If
the backlight is allowed to go off, the backlight remains off until the unit returns from the Suspend
state. If the backlight is not allowed to go off, the backlight remains on.
Backlight Intensity
You can set a different level for the intensity of the display backlight when the MX6 PPC is
running on battery power and a different level to use when the MX6 PPC is running on external
power.
Backlight intensity has no effect on the keypad backlight.
