22
Set the Power Off Timer
MX6 PPC Reference Guide
E-EQ-MX6PCRG-C-ARC
Set the Power Off Timer
Note: Refer to the section titled "Power Modes" later in this guide for information relating to
the power states of the MX6 PPC.
Tap
the
Start | Settings | System | Power
icon.
On battery power:
Turn off device if not used for
Change the parameter value and tap OK to save the change.
The default is 3 minutes. Selections are 1, 2, 3, 4, or 5 minutes.
On external power:
Turn off device if not used for
Change the parameter value and tap OK to save the change.
The default is 5 minutes. Selections are 1, 2, 5, 10, 15, or 30 minutes.
Note:
When the Power Off timer expires, the computer enters Suspend Mode.
