24
Connect the Audio Jack (Optional)
MX6 PPC Reference Guide
E-EQ-MX6PCRG-C-ARC
Connect the Audio Jack (Optional)
The MX6 PPC audio jack is located on the side of the unit next to the scan aperture and the SDA
door (Secure Digital Access). The internal speaker is disabled when the audio jack is connected.
Figure 2-5 Audio Jack Location
Lift up the protective audio jack cover and insert the barrel end of the connector into the MX6
PPC audio jack and push in firmly.
Note:
The audio option draws power from the main battery pack.
Set The Audio Speaker Volume
Note: An application may override the control of the speaker volume. Turning off sounds saves
power and prolongs battery life.
The audio volume can be adjusted to a comfortable level for the user. The MX6 PPC has an
internal speaker and a jack for an external headset.
The volume is adjusted using
Start | Settings | Personal tab | Sounds & Notifications
icon then
select the Notifications tab.
Change the setting and tap OK to save the change. You can also select / deselect sounds for key
clicks and screen taps and whether each is loud or soft.
Sounds
specific to primary events are selected using the options on the Sounds tab.
Reminder/Notifications
tones are selected using the options on the
Reminders/Notifications tab.
As the volume scrollbar is moved between Loud and Silent, the computer beeps each time the
volume increases or decreases in decibel range.
Tap the Volume icon in the navigation bar to adjust system sound volume.
