Summit Client Configuration
Summit Client Configuration
Summit Client Utility Icon
Note: Terminology used on your screen displays may be different than those shown in the figures in this section. Contact
your
for Summit driver updates as they become available.
Start the Summit Client configuration by tapping
Start | Programs | Summit | SCU
.
Important: After adding a new profile or changing parameters of an existing profile, tap
Start | Suspend
. When the device
Resumes, saved changes are applied.
When using the 802.11a radio, the U-NII 1 band is the preferred band for indoor operation. For regulatory domains in which the
U-NII 3 band is allowed, the following channels are supported: 149, 157 and 161. The AP must be configured accordingly.
Summit Client Utility
Start | Programs | Summit | SCU or SCU Icon in Taskbar
The Main tab provides information, the Admin Login and active config (profile) selection.
Profile specific parameters are found on the Profile tab. The parameters on this tab can be set to unique values for each profile.
The Status tab contains information on the current connection.
The Diags tab provides utilities to troubleshoot the client (network device).
Global parameters are found on the Global tab. The values for these parameters apply to all profiles.
Note: A password is required before making changes to Summit client profile parameters. A password is not required to
switch from one profile to another.
Help
Help is available by clicking the ? button in the title bar on most SCU screens.
SCU Help may also be accessed by selecting Start | Help and tapping the Summit Client Utility link. The SCU does not have
to be open to view the help information using this option.
E-EQ-MX8WMRG-C [ 195 ] MX8WM Reference Guide
