Auto Profile
When the profile named “ThirdPartyConfig” is chosen as the active profile, the Summit Client Utility passes control to
Windows Zero Config for configuration of all client and security settings for the network module.
The
Disable Radio
button can be used to disable the network card. Once disabled, the button label changes to Enable Radio.
By default the radio is enabled.
The
Admin Login
button provides access to editing wireless parameters. Profile and Global may only be edited after entering
the Admin Login password.
The password is case-sensitive.
Once logged in, the button label changes to Admin Logout. To logout, either tap the Admin Logout button or exit the SCU
without tapping the Admin Logout button.
Auto Profile
Auto Profile allows the user to configure a list of profiles that the SCU can search when a radio connection is lost. After using
the Profile tab to create any desired profiles, return to the Main tab. To specify which profiles are to be included in Auto Profile,
click the List button.
Select Profiles for Auto Profile
The Auto Profile selection screen displays all currently configured profiles. Click on the checkbox for any profiles that are to be
included in Auto Profile selection then click ok to save.
To enable Auto Profile, click the
O
n button on the
Main
tab.
When Auto Profile is On, if the radio goes out of range from the currently selected profile, the radio then begins to attempt to
connect to the profiles listed under Auto Profile.
The search continues until:
l
the SCU connects to and, if necessary, authenticates with, one of the specified profiles or
l
the Off button is clicked to turn off Auto Profile.
E-EQ-MX8WMRG-C [ 198 ] MX8WM Reference Guide
